[1:5 초대형 하이엔드급버기] TLR 5IVE-B 4WD Buggy Race Kit
역대 최초로 하이앤드급 버기가 1/5 초대형 사이즈로 출시하였습니다.
가솔린 버전.전동 컨버전 전부 가능한 미조립 레이싱 버기입니다.(미리 공구 사용)
1/10 차랑이랑 사이즈비교...
>
하이앤드급 차량명가 TLR Racing 에서 역대최초로 1/5 대형스케일 레이싱용 조립형버기를 출시하였습니다.챔피언 대명사 에이트 시리즈처럼 오직 우승을 위해 제작한 대형 5IVE-B 버기를 출시하였습니다.1/5 스케일에서 경기장에서 시합으로 사용할수있는 차량은 별로 없습니다.일단 샤시보시면 에이트확대형으로 보시면 됩니다.5mm 6061-T6 알류미늄재질 초강화 샤시입니다.강화 브레이크 시스템은 조절이 가능하도록 디자인되여있고 듀얼스테어링서보및 알류미늄 클러치 캐리어 및 센터 디프케이스는 4륜 독립구동시스템과 튼튼한 구조와 효율적인 드라이브구동성능을 보여줍니다.
듀얼 조향서보 트레이는 대부분 1/5대형사이즈 서보를 장착할수있도록 공간이 넉넉합니다.
Chassis
The 5IVE-B features a 5mm 6061-T6 aluminum chassis specifically engineered for competition. The chassis plate has been inspired by the legendary TLR 8IGHT™ platform, featuring a shorter wheel base than others for improved handling. The chassis plate also has milled pockets that save weight and allow enough flex for maximum traction under hard acceleration.
Heavy Duty Braking System
The 5IVE-B features stamped-steel rotors and, when combined with the heavy duty plates and pads, provide a sense of confidence and control that allows racers to drive harder into corners and come to a stop more quickly. Front-to-rear braking bias can also be fine-tuned for evolving track conditions.
Dual-Steering-Servo Radio Tray
The 5IVE-B radio tray has been designed to accommodate the most powerful 1/5-scale steering servos available. This includes the Spektrum™ line of 1/5-scale servos with patent-pending Back EMF technology that prevents servo fade and maintains maximum holding power for the duration of a receiver pack.
Racing Body and Wing
The 5IVE-B body has been inspired by those used on 1/8-scale racing buggies, featuring a cab-forward design. This distinctive shape provides greater front down force which improves steering. The wing features a removable wicker bill for tailoring the rear down force to meet the precise track conditions.
Aluminum Clutch Carrier and Center Diff Case
The 5IVE-B features race-bred drive system engineered to exacting standards to harness the power of a high-output gas engine during the most-extreme conditions. The clutch and center differential are both CNC-machined aluminum, providing strength and durability while helping to dissipate heat, keeping things cool and providing more consistent performance throughout a run.
Hard-Anodized Aluminum Shocks and Shock Towers
The hard anodized 24mm shocks include bleeder caps that make them easier to build without sacrificing performance. The machined aluminum shock towers offer multiple shock mounting options that give racers an abundance of tuning options for different track conditions.
One-Piece Glue-Style Wheels
The low rotational mass of these wheels allow the 5IVE-B to accelerate faster with less stress on drivetrain components.
Air Filter Designed Specifically for the 5IVE-B Buggy
Whatever 25cc-to-32cc engine you install in your buggy the included air filter has been designed for maximum air flow to the carb while keeping dirt, grit and debris out of your engine. This translates into an air filter which provides maximum protection while unleashing the monster horsepower your engine was built for.
Axle Boots
Molded rubber boots on the CVAs and center drive train dog bones increase U-joint life. The boots help keep grease in and dirt out so your axles last longer and require less maintenance.
Adjustable Toe and Anti-Squat Plates
For maximum tuning the 5IVE-B includes adjustable front and rear A-Arm mounts. By swapping out inserts you will be able to fine tune your car by altering the toe-in, anti-squat to maximize the traction and overall performance of the chassis.
Features:
- Purpose-built, racing kit based on the 8IGHT platform
- Hard-anodized, 5mm 6061-T6 aluminum chassis plate
- Heavy duty brakes
- Dual-steering-servo radio tray
- Cab-forward racing body
- Racing wing with removable wicker bill
- Aluminum clutch carrier and center-diff case
- Hard-anodized, 24mm aluminum shocks with bleeder caps
- AHard-anodized aluminum shock towers with multiple mounting holes
- Light, one-piece, glue-style wheels
- Specially designed air filter for racing engines
- Protective axle boots
- Adjustable toe and anti-squat plates
Specifications:
Type: 1/5 Scale 4WD Buggy
Length: 32.75 - 33.25 in (831.8 - 844.5mm) Total length can change based on the wing mount spacer used
Width: 18.0 in (457.2mm)
Height: 12.13 in (308mm)
Ground Clearance: 3.5 in (88.9 mm)
Wheelbase: 22.75 in (577.9mm
Weight: 30.5 lbs (13.8kg)
Chassis: 5mm Plate, 6061-T6 Aluminum
Suspension: 4-Wheel Independent
Gear Pitch: 1.5 Module
Wheel Size: 5.5 in (139.7mm) x 2.5 in (63.5mm)
Kit/RTR: Kit
Shock Type: 24mm, Hard Anodized, Oil Filled with Bleeder Caps
Body: Clear
Ball Bearings: Full Rubber Seal Ball Bearings in Car, Metal Shield for Clutch housing
Fuel Tank Capacity: 27.1 oz (800cc)
Experience Level: Advanced
Recommended Environment: Outdoor
Assembly Time: 7-9 Hours
Needed To Complete(별도로 필요):
- 26-29cc Gas engine with Exhaust
- 2-Channel Radio System
- (3) 1/5 Scale Servos
- Receiver Battery Pack and Charger
- Tools for Assembly
- Pump Gas and 2-Stroke Oil